Fiber Plus International


Company Contact

10 Buist Road, Suite 403
Milford, PA 18337
United States



Designs and manufactures fiber optic connectivity solutions. Bullet® Bare Fiber Adapters, DZE® OTDR launch cables, Divot® Bare Fiber Adapter, Delay Lines, QuickLINK® Adapters, SwitchBox® Manual A/B Switch.



Testing bare fiber just got a lot easier and faster. The Divot® Bare Fiber Adapter (Tester) accepts cleaved and non-cleaved fiber requires only 3/4″ of bare fiber exposed and has a typical insertion loss of less than 0.5 dB when using cleaved fiber. No messy gel applicators or reservoirs to fill. Simply strip your fiber and insert.

The DZE® OTDR Launch Cable is designed to aid in the testing of fiber optic cable when using an OTDR to help minimize the effects of the OTDR’s launch pulse on measurement uncertainty. Using a DZE® launch cable at the beginning of the fiber under test and a DZE® receive cable at the end of the fiber under test allows the ability to perform loss measurements on the entire length of the fiber.

The lightweight unit measures only 6.25″ in diameter and 1.25″ high and includes a carabiner clip allowing the unit to be easily attached to belts, equipment straps, and rack mounts.

The SwitchBox® Manual Fiber Optic A/B Switch is a device that accepts optical inputs from a primary path and a secondary path to provide manual switching in the event that the primary path signal is broken or otherwise disrupted.

Easily switch both transmit and receive fibers to a backup path. No optical to electrical conversion between the fiber connections, no mirrors or substrates, and no power required, resulting in a Failsafe Network Switch. Extremely low loss, low back reflection, and infinite crosstalk. Ideal for simultaneous network protection of both transmit and receive paths.



Cable Assemblies/Patchcords
Components: Fiber
Fiber Optic Testing Equipment




ISE Buyers Guide